| Chinese medicine pulverizer surface overheated reasons and solutions you have to look |
|
| 2022-9-27 publish |
Nowadays, with the gradual development of Chinese traditional medicine cause, grinding Chinese traditional medicine has also become a major work. Chinese traditional medicine crusher has strong safety, and the parts in contact with materials are all polished stainless steel, so it is durable, consumes less materials and is economical. The motor bearing of Chinese herbal medicine crusher adopts foreign famous products, and the consumable material is only one kind of blade, which is made of special steel, and the blade of advanced razor is the same quality. The fineness can be adjusted at will. The high-speed rotating blades send the materials that meet the requirements from the crushing chamber to the next powder grading mechanism, and the materials that do not meet the requirements are automatically crushed twice through the return port.
Maintenance instructions
According to the frequency and time of use of the machine, oil should be added to the oil cup of the bearing seat 5-10 times a month regularly. If the work is more than 12 hours a day, oil should be added once a day. Wearing parts should be often checked after power failure, timely replacement, to ensure the output and other parts, blade, ring to often check wear, if wear, the output decreases, grain size becomes coarse, machine cavity heating, then should be replaced in time.
During the work, we should pay attention to the operation of the crusher at any time, and the feeding should be even to prevent blocking and boring cars, and do not overload the work for a long time. If vibration, noise, bearing and body temperature are found to be too high, spray material outward and other phenomena, should immediately stop the inspection, troubleshooting before continuing to work.
There are three cases of overheat on the surface of the shell of Chinese medicine pulverizer
1, the load is too large;
2, motor humidity;
3. The power supply voltage is too low.
So now that we know why, what can we do about it? Let's solve these three problems with a few words in order.
1, the load is too large, we will change to reduce the working pressure of the traditional Chinese medicine crusher; It just takes care of itself;
2. Motor humidity is more simple, and the motor is dried by ventilation or blow-drying.
3, the power supply voltage is too low, as long as you adjust the power supply voltage.
How, very good solution, use Chinese medicine shredder to deal with these difficult disease actually is not very difficult.
|
|
|
0938-2721678 
甘公网安备 62050302000280号